澳大利亚求购水处理系统(2,000升/天)(Turnkey Bore Water Treatment System)

Request for Quote: Turnkey Bore Water Treatment System (2, 000 L/day)
1. Project Overview

This Request for Quote is for the supply of a complete, pre-manufactured water treatment system for a rural property in South Eastern Victoria, Australia. The system's purpose is to treat raw bore water to a potable standard for a multi-household domestic application. The successful supplier will provide a turnkey unit that minimizes on-site installation and is ready for integration with existing infrastructure.

2. Key Requirements

System Type: A pre-manufactured, skid-mounted, multi-stage water treatment plant.

Output Capacity: A minimum production capacity of 2, 000 liters per day (L/day) of treated, potable water.

Power Supply: Must be compatible with a single-phase mains power connection.

Exclusions: The quote must exclude civil works and solar power infrastructure.

3. Water Source and Quality

Source: Bore water.

Water Test Results: (Please provide your detailed water test results to the supplier, as this is a critical factor for system design and accurate quoting. ) The system must be designed to treat contaminants commonly found in Australian bore water, including dissolved salts, iron, manganese, and bacteria.

4. Required System Components

The system must be a comprehensive, end-to-end solution, including the following stages:

Pre-treatment: This stage is critical for protecting the main filtration membranes from fouling and damage. It must include:

Sediment filtration to remove dirt, sand, and rust.

Specialized filtration for the removal of iron and manganese, as indicated in the water test results.

Reverse Osmosis (RO) Core: A high-pressure RO unit designed for brackish water with a production capacity of approximately 2, 000 L/day (528 GPD). The system should have an operational recovery rate that produces a manageable volume of brine.

Post-treatment: To ensure the final water is safe and palatable for drinking. This must include:

A remineralization stage to reintroduce essential minerals (such as calcium and magnesium) and balance the pH of the treated water.

A UV disinfection unit to sterilize the water and eliminate bacteria and viruses without the use of chemicals.

5. System Integration & Connections

The pre-manufactured unit must be designed to connect directly to the following on-site infrastructure:

Inlet: Connection from a bore pump to the pre-treatment stage.

Treated Water Outlet: Connection to a dedicated drinking water storage tank. This connection must be designed for professional installation by a licensed plumber and include a backflow prevention device as required by Victorian regulations.

Waste Outlet: Connection for the concentrated brine (reject water) to a designated, properly constructed brine pond.

6. Supplier Requirements

We are seeking a single-source contractor who can provide a complete turnkey service. This includes, but is not limited to:

A detailed, itemized quote for the complete system.

Off-site factory testing of the unit prior to delivery.

Supervised installation and commissioning on-site.

All necessary operation manuals and training for the end-user.

Availability of a long-term maintenance contract.

09-17分值:5 vip